Table 6-3 Computer Setup—Advanced (for advanced users) (continued)
Option Heading
System Options Congure storage controller for Intel Optane
Enables the Intel® Optane™ memory module.
Hyperthreading
Lets you control processor capability. Default is enabled.
Multiprocessor
Use this option to disable multiprocessor support under the operating system. Default is enabled.
Virtualization Technology (VTx) (Intel only)
Controls the virtualization features of the processor. Changing this setting requires turning the computer o
and then back on. Default is disabled.
Virtualization Technology for Directed I/O (VTd) (Intel only)
Controls virtualization DMA remapping features of the chipset. Changing this setting requires turning the
computer o and then back on. Default is disabled.
M.2 SSD
Lets you disable the M.2 solid-state drive slot. Default is enabled.
M.2 WLAN/BT
Lets you disable the wireless module slot. Default is enabled.
Allow PCIe/PCI SERR# Interrupt (enable/disable)
Allows PCI devices to report PCI/PCIe System Error signals, such as address parity errors, data parity errors,
and critical errors other than parity. Default is enabled.
Power Button Override (disable/4 sec/15 sec)
Lets you disable or enable and select the number of seconds you have to hold down the power button for it
to force the system to turn o. Default is 4 sec.
86 Chapter 6 Computer Setup (F10) Utility ENWW
To Next Page
Loading...
