HP ProLiant BL30p

Server Blade Configuration and Utilities
HP ProLiant BL30p Server Blade Setup and Installation Guide 5-33
•
•
•
•
•
For optimal SAN connectivity, verify that:
The HP ProLiant BL30p server blade has the FC adapter installed, and that it is
correctly installed in the server blade Refer to the HP Dual Port Fibre
Channel Adapter (2-Gb) Installation Instructions
An FC-compatible interconnect is installed in the enclosureRefer to the
documentation that shipped with the interconnect option
The enclosure management module firmware is up-to-dateRefer to the
ProLiant BL p-Class support site on
www.hp.com
The server blade is properly cabled to a supported SAN
SAN storage drivers are loadedRefer to supporting white papers and to
www.hp.com/servers/rdp
For SAN configuration information for the server blade, consult the SAN Design
Reference Guide located at
http://h18000.www1.hp.com/products/storageworks/san/documentation.html