11. Install the PCI slot blank retainer.
12. Cable the controller
.
13. To enable HPE Smart Array SR SmartCache in a Smart Array P-class type-p Gen10 controller, install an energy pack
.
SmartCache and CacheCade enable solid-state drives to be used as caching devices for hard drive media. These features accelerate
access to frequently used data by caching hot data from the hard drives onto the solid-state drives.
14. If removed, install the air baffle
.
15. Install the access panel
.
16. Install the front bezel
.
17. Do one of the following:
If the server is in tower mode: Position the tower server for operation .
To Next Page
Loading...
