22 HP ProLiant ML350 Generation 4 Server Maintenance and Service Guide
2. Push down on the power supply release latch, and remove the power supply
from the server.
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
To replace the component, reverse the removal procedure.
Non-Hot-Plug Power Supply
WARNING: To reduce the risk of personal injury or
damage to the equipment, the installation of power supplies
should be performed only by individuals who are qualified in
servicing server equipment and trained to deal with products
capable of producing hazardous energy levels.
WARNING: To reduce the risk of electric shock, do not
disassemble the power supply or attempt to repair it. Replace it
only with the specified spare part.
To Next Page
Loading...
