HP ProLiant ML350 Generation 4 - Environmental Specifications

68 HP ProLiant ML350 Generation 4 Server Maintenance and Service Guide
Models with a Non-
redundant power supply
Input requirements Specification
Rated input voltage 100 VAC to 240 VAC
Rated input frequency 47 Hz to 63 Hz
Rated input current 7.8 A (110 V) to 3.9 A (220 V)
Rated input power 710 W
BTUs per hour 2425
Power supply output Specification
Rated steady-state power 460 W
Maximum peak power 484 W
Acoustic Noise Specification
Idle <6.5 and 48
Operating <6.5 and 48
Environmental Specifications
Temperature range* Specification
Operating
10°C to 35°C (50°F to 95°F)
Shipping
-40°C to 70°C (-40°F to 158°F)
Maximum wet bulb temperature
28°C (82.4°F)
Relative humidity
(noncondensing)**
Specification
Operating 10% to 90%
Non-operating 5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m
(1.8°F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C
(113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.