HP StorageWorks SN6000 Fibre Channel Switch Installation and Reference Guide 33
3Installation
This section describes how to install and configure the switch.
Site requirements
Consider the following items when installing an SN6000 Fibre Channel Switch.
Management station and workstation requirements
The management station requirements for Simple SAN Connection Manager and Enterprise Fabric
Management Suite are described in Table 7. Workstation requirements for QuickTools are described in
Table 8.
Table 7 Management station requirements for Simple SAN Connection Manager and Enterprise Fabric
Management Suite
Operating System • Windows Server 2003 R2, Windows Storage Server 2003 R2
x64/x86 with SP2. This requires Microsoft hotfix QFE932755
(updated Storport storage driver). The update is available on
the Microsoft website:
http://support.microsoft.com/kb/932755
.
• Windows Server 2008 x64/x86 with SP2
• Windows Server 2008 x64/x86 R2
Memory 2 GB
Disk Space • 200 MB of disk space for HP StorageWorks Simple SAN
Connection Manager software
• 150 MB of disk space for HP StorageWorks Enterprise Fabric
Management Suite
Processor 2 GHz or faster
Internet browser Microsoft Internet Explorer 6.0 or later
Netscape Navigator 6.0 and later
Firefox 1.5 and later
Java Runtime Environment 1.5 or higher
Hardware RJ-45 Ethernet port
PCI-e slots for the HP StorageWorks PCI-e FC HBA
Hardware CD-ROM drive (optional)
RJ-45 Ethernet port
RS-232 serial port (optional)
PCI-e slots for the HP StorageWorks PCI-e FC HBA
To Next Page
Loading...
Need help?
General