HP StorageWorks SN6000 Installation And Reference Guide

HP StorageWorks SN6000 Fibre Channel Switch Installation and Reference Guide 75
C Technical Specifications
This appendix contains the specifications for the SN6000 Fibre Channel Switch. See ”General
Description” (page 9) for the location of all connections, switches, controls, and components.
General specifications
Table 11 lists general specifications for the SN6000 Fibre Channel Switch.
Table 11 General specifications
Specification Description
Fibre Channel protocols FC-PH Rev. 4.3
FC-PH-2
FC-PH-3
FC-AL Rev 4.6
FC-AL-2 Rev 7.0
FC-FLA
FC-GS
FC-GS-2
FC-GS-3
FC-FG
FC-SW-2
FC-Tape
FC-VI
Fibre Alliance MIB Version 4.0
Fibre Channel Element MIB RFC 2837\
Fibre Channel classes of service Classes 2 and 3
Modes of operation Fibre Channel Classes 2 and 3,
connectionless
Port types
•SFP ports
•XPAK ports
G_Port, GL_Port, F_Port, FL_Port, E_Port,
TR_Port
G_Port, F_Port, E_Port
Port characteristics All ports are auto-discovering and
self-configuring.
Number of Fibre Channel ports 12-port single power supply model: Four
XPAK ports and eight SFP ports are active.
Additional ports can be activated in four
port increments with the port activation
license key.
24-port single and dual power supply
models: Four XPAK ports and 20 SFP ports
are active.

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English