HP StorageWorks SN6000 Fibre Channel Switch Installation and Reference Guide 9
1General Description
The HP StorageWorks SN6000 Fibre Channel Switch (Figure 1) is a 24 port, 8 Gb/s switch with both
Ethernet and serial management interfaces. This section describes the features and capabilities of the HP
StorageWorks SN6000 Fibre Channel Switch.
You can manage fabrics with the command line interface (CLI), the QuickTools web applet, the optional
Enterprise Fabric Management Suite (EFMS) application, or the HP StorageWorks Simple SAN Connection
Manager (SSCM). Simple SAN Connection Manager provides a single pane of glass management
application for managing and provisioning storage from HP MSA/EVA storage arrays, managing HBAs
and managing H-series switches. SSCM provides switch functions for day-to-day management activities
such as, IP network configuration, administrative password control, Simple Network Management Protocol
(SNMP) setup, firmware upgrades, and implementation of HP best zoning practices (single initiator
zoning).
• For more information about the CLI, see the HP StorageWorks SN6000 Fibre Channel Switch
Command Line Interface Guide.
• For information about QuickTools, see the HP StorageWorks SN6000 Fibre Channel Switch QuickTools
Switch Management User Guide.
• For information about Simple SAN Connection Manager, see the HP StorageWorks Simple SAN
Connection Manager User Guide.
• For information about downloading Enterprise Fabric Management Suite with a 30-day trial license,
see the HP website: w
ww.hp.com/go/EFMS.
Figure 1 SN6000 Fibre Channel Switch
To Next Page
Loading...
Need help?
General