6. Select the USB key.
7. Click Browse.
8. Navigate to the desired location on the USB key and assign a file name to the profile.
9. Click Save.
10. Click Finish.
The HP ThinPro configuration capture is complete. Remove the USB key.
Restore an HP ThinPro Configuration From a USB Key
1. Attach a USB key containing the profile you want to copy to the thin client.
2. Click Control Panel > Management > Thinstate.
3. Select the HP ThinPro configuration, and then click Next.
4. Select restore a configuration, and then click Next.
ENWW Control Panel 125
To Next Page
Loading...
