FUP Commands
File Utility Program (FUP) Reference Manual—523323-014
2-157
REPORTWIDTH
REPORTWIDTH
Sets the maximum length (in columns) for FUP to format its output. This command
changes the normal (default) 132-character output format of these FUP commands to
a smaller output format:
COPY with a DUMP option
FILES
LISTLOCKS
SUBVOLS
The REPORTWIDTH command became an option of the CONFIG[URE] command
with the D30 product version of FUP. However, for compatibility, FUP product versions
starting at D30 continue to recognize the REPORTWIDTH option as command syntax.
For more information, see CONFIG[URE] on page 2-26.
To Next Page
Loading...
