Set up and Installation
Supported Operating Systems
Operating System Automatic Backup File Sharing for Remote Access to
of Computers
Running...
Computers Computers
Running... Running...
Windows Vista Home Premium 32-bit or
64-bit SP2
X X
Windows Vista Ultimate 32-bit or 64-bit
SP2
X X X
Windows XP Home SP3 X X
Windows XP Professional SP3 X X X
Windows XP Media Center Edition 2005
with SP2 and Rollup 2
X X
Wireless Support
You must connect the HP Data Vault to your router (or switch) with an Ethernet cable. The server
does not support wireless connection to your router. However, computers connected wirelessly to
a wireless access point or router are supported.
Turn on the Server
In this article...
The Server in Your Network
Turn on the Server
Check the Server Lights
The Server in Your Network
How you connect the HP Data Vault to your network depends on the network configuration.
This example shows a broadband router connecting the following:
• HP Data Vault (Requires wired connection to a router, and remote features require a broadband
Internet connection.)
• Wired and wireless network devices such as notebooks, desk computers, TVs and gaming
consoles
• Remote devices such as notebooks and iPhones
The server requires a DHCP-enabled router to get its IP address. By default, most routers include a
DHCP server. For more information, check your router documentation.
Caution
If you have wireless functionality on your network, be sure to enable your router’s security
7
To Next Page
Loading...
Need help?
General