HP Data Vault User's Guide
POWER INDICATOR IS OFF
The server is not powered on.
To power on the server
1. Make sure the power cord is fully plugged into the server and a powered electrical outlet.
2. If plugged into a surge protector or power strip, make sure the device is switched on.
LIGHT-BAR BREATHING AQUA WHITE
A breathing or blinking aqua white light bar indicates that a hard drive has been
installed, but has not been initialized. It occurs in the following conditions:
• When setting up the server for first time—the light-bar is breathing aqua white until the set up on
the first computer is complete.
• The drive has been removed from total storage and the light bar is blinking—for example, when
removing a drive from the drive bay. See Add and Remove Drives from Server Storage
.
• When adding a new drive the light bar blinks aqua white, before it has been added to server
storage.
Related Topics
Windows Home Server Console Help
 Server Storage
HEALTH LIGHT IS RED
A red Health indicator light has the following states:
• Solid red - operating system failure.
Blinking red - power on test has failed or BIOS failed.
258
To Next Page
Loading...
Need help?
General