HP XP1024 User Manual

36 CLI migration
CAUTION: The array configuration should not be changed through any interface between data collection
and the CLI Migration Tool output file submission to Hdvmcli. The collected data collected might be invalid
if any configuration changes between data collection and the submission of the CLI Migration Tool output
file to Hdvmcli.
Working with the CLI Migration Tool files
Automated installation is not supported for the CLI Migration Tool. Extract a tar file into a specified
directory and then apply the following procedures (”Setting up the CLI Migration Tool”) before using the
tool.
Setting up the CLI Migration Tool
Follow these instructions to set up the migration tool:
1. Untar the migrationtool.tar and extract it to a folder (for example, temp).
2. Change the configurable parameters (if needed) in the cmt.cfg configuration file under
/temp/migrationtool.
Execution of the CLI Migration Tool
1. Either set the environment variable RUN_DIR to the working directory or allow the tool to set it to the
current directory.
2. Run the cmdct batch file under /temp/migrationtool with the ipaddress of the array and type of
array.
NOTE: The cmdct tool generates the properties file [<array serial number>.properties] and
gives it to the cmt tool with the -p option.
Syntax of cmdct:
cmdct -ip <array ip address> -type <array type>
Example:
cmdct -ip 15.43.212.61 -type 1024
Table 13 CLI Migration Tool files
File name Description
cmt.cfg Configuration file for the CLI Migration Tool that contain the parameters MAX_LINE,
OS_NAME and TRACE_LEVEL
cmt.cfg Configuration file for the CLI Migration Data Collection Tool that contain the parameter
TRACE_LEVEL and TRACE_FILENAME
cmt.bat Batch file to run the CLI Migration Tool in Windows platform
cmt.sh Batch file to run the CLI Migration Tool in non-Windows platform
cmdct.bat Batch file to run the CLI Migration Data Collection tool in Windows platform
cmdct.sh Batch file to run the CLI Migration Data Collection tool in non-Windows platform
CMT_commands_
legacy.xml
XML file containing Command View CLI commands and equivalent hdvmcli commands
for the XP512/XP48 arrays.
CMT_commands_
nonlegacy.xml
XML file containing Command View CLI commands and equivalent hdvmcli commands
for XP10000/XP12000/XP128/XP1024 arrays
cmt.jar Jar file containing classes for the CLI Migration Tool
cmdct.jar Jar file containing classes for the CLI Migration Data Collection Tool

HP XP1024 Specifications

General

Brand	HP
Model	XP1024
Category	Storage
Language	English