HP XP1024 - List Array_Config; List Port -L; List Port -Hostgrp -L

74 Sample commands for CLI migration
2) list array_config
CV_CLI 10033 (R)> list array_config
Sending Request to CV server ...
10033 : Data retrieval error encountered. Data display is old. Run list array_st
atus for more information.
FirmwareRevision Allocatedspace Unallocatedspace Freespace TotalCapacity
RawCapacity TotalCacheSize
21-12-01 1800 Gbytes 490 Gbytes 281 Gbytes 2571 Gbytes 4075 Gbytes 8
192 Mbytes
Number of LDEVs per CU
CU 0 134
Number of LDEVs per ACP pair
ACP Pair 1 183
ACP Pair 2 105
CV_CLI 10033 (R)>
3) list port -l
CV_CLI> list port -l
Sending Request to CV server ...
10033 : Data retrieval error encountered. Data display is old. Run list
array_status for more information.
PortNameType Loop-Id (Address) Topology WWN
ChannelSpeed Security
CL1-A Fibre 3 (E2) FCAL with Fabric ON 50060E8003
273100 Auto Mode ON
CL1-B Fibre 120 (10) Point-to-Point with Fabric ON 50060E8003
273101 Auto Mode OFF
CL1-C Fibre 2 (E4) Point-to-Point with Fabric ON 50060E8003
273102 Auto Mode ON
CL2-A Fibre 123 (04) Point-to-Point with Fabric OFF 50060E8003
273110 Auto Mode ON
CL2-B Fibre 17 (CC) Point-to-Point with Fabric ON 50060E8003
273111 Auto Mode ON
CL2-C Fibre 18 (CB) Point-to-Point with Fabric ON 50060E8003
273112 Auto Mode ON
4) list port -hostgrp -l
CV_CLI 10033 (R)> list port -hostgrp -l
Sending Request to CV server ...
10033 : Data retrieval error encountered. Data display is old. Run list array_st
atus for more information.
PortNameHostGroupNickname HostMode HostModeName
CL1-A 1A-G00 08 HP mode
CL1-A SC2l 01 Reserved mode