HP XP1024 - Page 46

46 CLI migration
For XP128/XP1024
/XP12000XP10000
arrays
Hdvmcli
AddWWNForHostStora
geDomain
serialnum=<array
serial number>
model=<array type>
port=<port id>
domain=<domain id>
wwn=<comma
separated wwns>
Supported for
XP128/XP1024/
XP12000/XP10000
arrays.
In translations for range
commands, the
migration is aborted at
the first occurrence of an
error and the command
appears as an error for
translation in the output
file.
add security to
lun
add
security_to_lun
<portname>,
<lun>,
<wwn/wwngrp>
[,<wwn/wwngrp>…]
Not supported Hdvmcli
AddWWNForLun
serialnum=<array
serial number>
model=<array type>
port=<port id>
domain=<domain id>
devnum=<ldev id>
wwn=<comma
separated wwns>
Partially supported.
NOTE: For the
XP48/XP512 arrays,
the domain has to be
specified for an add
security to lun
operation. You will need
to edit the file to pass
the domain value.
Otherwise, the domain
parameter will show
<***ErrorCode***>
in the output file by the
CLI Migration Tool.
Either wwn or wwngrp
can be specified, but
at least one should be
specified
add security to
lun group
add
security_to_lun_
group
<portname>,
<lungrpNickname>
, <wwn/wwngrp>
[,<wwn/wwngrp>…]
Not supported For XP512/XP48 arrays
Hdvmcli
AddWWNForLunGroup
serialnum=<array
serial number>
model=<array type>
port=<port id>
objectID=<lungroup
object id>
wwn=<comma
separated wwns>
Supported
Either wwn or wwngrp
can be specified, but
at least one should be
specified
Table 14 Manual CLI command mapping (continued)
Command View CLI
XP512/XP48
Command View CLI
XP128/XP1024/
XP10000/XP12000
Command View AE CLI Automatic translation
support by the CLI
Migration Tool