HP Xw6600 - Workstation - 2 GB RAM - Removing the Cable Lock; Universal Chassis Clamp Lock (Optional); Removing the Chassis Clamp Lock

Removing the cable lock
To remove the cable lock, unlock it and pull it out of the cable lock slot, as shown in the following figure.
Figure 4-3 Removing the cable lock
Universal chassis clamp lock (optional)
If a universal chassis clamp lock is installed on your workstation, remove it before servicing the
workstation.
Removing the chassis clamp lock
To remove the lock:
1. Unlock the device and remove the locking mechanism, as shown here:
Figure 4-4 Unlocking the device
ENWW Removing and replacing components 57