Power connections
To ensure proper power supply connections to drives and powered components, refer to the following
diagram.
Figure 4-24 Workstation power supply cable connections
Table 4-5 Power supply cable connection guide
Item Component Item Component Item Component
A Power supply E Auxiliary power for PCI
IEEE 1394 or audio card
I Hard drive number 1
B Main power
connector
F Optical drive 1 J Hard drive number 2
C Processor power
connector
G Optical drive 2 K 4–pin style connector (white) power
harness
D Auxiliary power for
PCI Express card
H Floppy drive L SATA-style connector (black) power
harness
System fan assembly
This section describes how to remove the system fan assembly.
Removing the system fan assembly
To remove the system fan assembly:
1. Disconnect power from the system (see
Predisassembly procedures on page 52).
2. Remove the side access panel (see
Side access panel on page 58).
ENWW Removing and replacing components 73
To Next Page
Loading...
