HP Z1 G2 Maintenance And Service Guide

Changing the power button conguration (Windows only)
CAUTION: To reduce the risk of data loss, do not use the power button to turn o the computer unless the
system is unresponsive.
NOTE: If the computer is unresponsive, press and hold the power button for four seconds to completely turn
o power to the computer.
Windows 7 or Windows 10
1. Select Start, and then select Control Panel > System and Security > Power Options.
2. In the left pane, click Choose what the power buttons do.
3. Select the desired options.
If you choose Sleep or Hibernate, you can press the power button to initiate standby, and then press it again
to exit standby and return to your work. To completely turn o the workstation, select Start > Shut Down.
Windows 8
1. Point to the upper-right or lower-right corner of the Start screen to display the charms.
2. Select Search.
3. In the Search eld, type control.
4. Select Control Panel, and then select System and Security > Power Options.
5. Select Choose What the Power Button Does.
6. Select the desired options.
Desktop management 35

HP Z1 G2 Specifications

General

Brand	HP
Model	Z1 G2
Category	Desktop
Language	English