HPE 3PAR StoreServ

Local notification access is now enabled.
Configuring Local Notification Settings During Initial Setup
The following instructions guide you through the initial configuration of local notification settings using the
menu that appears after enabling local notification access for the first time, as described in Enabling
Local Notification Access on page 45.
To configure local notification settings later, see Using Notification Maintenance Utilities on page 47.
After enabling local notification access for the first time, you have the option of setting up local notification
from the Service Processor Enable/Disable Local Notification Access menu as follows:
Procedure
1. Under Configure Mailhost, provide the mailhost information as follows:
a. Enter a mailhost IP address in the Mailhost IP Address field. This is the mailhost that the SP uses
to send notification messages to users defined with this menu.
b. Enter a mailhost domain name in the Mailhost Domain Name field. This is the domain name
associated with the mailhost IP address (for example, HPE.com), not the fully-qualified mailhost
name (for example, mailhost.hpe.com).
c. (Optional) To enable RAP forwarding, click ON. When enabled, RAP forwarding automatically
sends copies of the notification email messages to 3PAR Central.
2. Under the Setup Reporting Site Info option, provide the site information as follows:
a. In the Company/Site Name field, enter the name of the company or customer site name. If you do
not provide a name, the name Customer is used by default.
b. (Optional) In the Site Number field, enter a site number. If you provide an 3PAR site number at this
time, it can help clarify reporting, especially for local service providers. If you do not provide a site
number, 1 is used by default.
c. If necessary, use the Timezone list to select a time zone. If you do not specify a time zone, the time
zone currently set on the SP is used by default.
3. Under User Profile/Site Notification Setup, create user profiles and notification records as follows.
NOTE: User profiles and notification records can be added at any time.
a. In the First Name and Last Name fields, enter the first and last name of a user for the purpose of
creating a profile.
b. In the Email Address field, enter the email address for the user profile.
c. Use the Category list to select the type of user for this profile.
d. In the Company field, enter a company name for this user profile.
4. Click Configure Local Notification to save the new settings and create the new user profile and site
notification record.
The SPOCC screen appears.
5. On the SPOCC menu, click the Notify option to confirm that a site notification record appears for each
user profile you created.
46 Local Notification Service