Control parameter name Description
Max Files in Group Maximum number of files that can be grouped
together for transfer.
Scrub Weekly Files (replaced with Enable Scrubber
option starting SP-4.4.0 MU4)
Perform a weekly file scrub.
Enable scrubber (replaces Scrub weekly files
option starting SP-4.4.0 MU4)
Perform real time scrubbing of files.
Max Files before Transfer Perform a transfer when this number of files are
queued.
Filetypes to Transfer First File types that should be transferred first (there is a
maximum of five file types, and they should be in a
comma-separated list).
FIFO/LIFO Use Last In First Out (LIFO) when selecting the
next file to transfer.
Max File Size before File Split (Kb) — Modem Maximum size, in kilobytes, of a file to transfer over
modem.
File Split Size (Kb) — Modem When a file’s size exceeds the maximum modem
size, break the file down into parts this size, in
kilobytes.
Max File Size to Transfer (MB) — Modem Maximum size, in megabytes, of a file queued for
transfer via modem.
Larger files are kept for 14 days.
Delay Before Closing Group Wait this number of seconds before closing the
current file group.
The following section describes the file transfer options and how to modify them using SPMAINT.
Editing File Transfer Processes using SPMAINT
NOTE: These values should be changed only with guidance from an authorized Hewlett Packard
Enterprise support provider.
To access the SP Process Control Parameters submenu using SPMAINT:
Procedure
1. From the SPMAINT main menu, enter 1 for SP Control/Status, then press ENTER.
2. Enter 15 for SP Process Control Parameters, then press ENTER.
Use the SP Process Control Parameters submenu to edit the file transfer processes parameters for the
SP.
SP Process Control Parameters lists all parameters by ID number, provides their default values, and
notes how they are impacted when their values are edited.
SP Control/Status Functions 23
To Next Page
Loading...
