HPE ProLiant BL460c Gen10 Service Manual

HPE ProLiant BL460c Gen10 Server Blade Maintenance
and Service Guide
Part Number: 876834-009
Published: April 2020
Edition: 9
Abstract
This guide describes identification and maintenance procedures, diagnostic tools, specifications and requirements for
hardware components and software. This guide is for an experienced service technician. Hewlett Packard Enterprise
assumes you are qualified in the servicing of computer equipment, trained in recognizing hazards in products, and are
familiar with weight and stability precautions.

HPE ProLiant BL460c Gen10 Specifications

General

Processor	Intel Xeon Scalable processors
Memory Slots	16 DIMM slots
Form Factor	Blade
Management	HPE iLO 5
Memory	Up to 3TB DDR4
Storage	Up to 2 SFF SAS/SATA drives
Network	FlexibleLOM
Chassis	HPE BladeSystem c7000 or c3000 enclosures
Storage Controller	HPE Smart Array controllers
Network Controller	HPE FlexibleLOM options
Power Supply	Enclosure provides redundant power
Operating System Support	Windows Server, Linux, VMware

Summary

Illustrated Parts Catalog

Mechanical Components

System Components

Removal and Replacement Procedures

Required Tools

Lists essential tools like T-15 Torx screwdriver and Phillips screwdriver for component replacement.

Safety Considerations

Covers precautions for handling components and avoiding potential hazards during service.

Server Blade Preparation

Procedures for powering up and powering down the server blade before performing maintenance.

Troubleshooting

Troubleshooting Resources

Lists available documentation for resolving server issues, fault isolation, and error messages.

Diagnostic Tools

Product QuickSpecs

UEFI System Utilities and Boot Modes

Covers UEFI System Utilities features and selection of boot modes (UEFI/Legacy).

Secure Boot and Embedded UEFI Shell

Intelligent Provisioning

Support and Monitoring Tools

Component Identification

Front Panel Components and LEDs

Drive and SSD Identification

System Board Components

Memory Module Identification

Details DIMM slot locations, label interpretation, NVDIMM characteristics, and LEDs.