EasyManua.ls Logo

HPE ProLiant BL460c Gen10

HPE ProLiant BL460c Gen10
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Drive numbering
Depending on the configuration, this server blade can support hard drives, SSDs, NVMe SSDs, and uFF drives (supported
in a SFF Flash Adapter) in the drive bays. Depending on the device installed, the bay number might be dierent.
Item Hard drive/SSD bay
numbering
uFF drive bay
numbering
NVMe drive bay numbering
1 1 1 and 101 1
2 2 2 and 102 2
Hot-plug drive LED definitions
Item
LED Status Definition
1 Locate Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
2 Activity
ring
Rotating green Drive activity
O No drive activity
3 Do not
remove
Solid white Do not remove the drive. Removing the drive causes one or more of the logical
drives to fail.
O Removing the drive does not cause a logical drive to fail.
4 Drive
status
Solid green The drive is a member of one or more logical drives.
Table Continued
Component identification 93

Table of Contents

Other manuals for HPE ProLiant BL460c Gen10

Related product manuals