5. Install the access panel.
6. Install the server blade.
7.
Power up the server blade.
More information
Power up the server blade
Replacing the access panel
Install the server blade
Removing and replacing the FlexibleLOM adapter
Procedure
1.
Power down the server blade.
2.
Remove the server blade.
3.
Place the server blade on a flat, level work surface.
4.
Remove the access panel.
5. Remove the mezzanine assembly.
6. Use the FlexibleLOM handle to remove the FlexibleLOM.
Removal and replacement procedures
62
To Next Page
Loading...
