HPE ProLiant BL460c Gen10

Specifications
Environmental specifications
Specification Value
Temperature range
1
—
Operating 10°C to 35°C (50°F to 95°F)
Nonoperating -30°C to 60°C (-22°F to 140°F)
Relative humidity (noncondensing)
2
—
Operating 10% to 90% @ 28°C (824°F)
Nonoperating 5% to 95% @ 387°C (1017°F)
Altitude
3
—
Operating 3050 m (10000 ft)
Nonoperating 9144 m (30000 ft)
1
The following temperature conditions and limitations apply:
• All temperature ratings shown are for sea level.
• An altitude derating of 1°C per 3048 m (18°F per 1000 ft) up to 3048 m (10000 ft) applies.
• No direct sunlight is allowed.
• The maximum permissible rate of change is 10°C/hr (18°F/hr).
• The type and number of options installed might reduce the upper temperature and humidity limits.
• Operating with a fan fault or above 30°C (86°F) might reduce system performance.
2
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F).
3
Maximum storage altitude corresponds to a minimum pressure of 70 kPa
(101 psia).
Server blade specifications
Specification
Value
Height 18070 mm (711 in)
Depth 51751mm (2037 in)
Width 5537 mm (218 in)
Weight (maximum) 633 kg (1396 lb)
Weight (minimum) 450 kg (990 lb)
Specifications 108