HPE 5920 series

Figure 8: Mounting and grounding positions of the HPE 5900AF-48G-4XG-2QSFP+/5900AF-48G-4XG-2QSFP+ TAA
switches
(1) Auxiliary grounding point 2
(2) Rear mounting position
(3) Primary grounding point (4) Auxiliary grounding point 1
(5) Front mounting position
Attaching the mounting brackets and chassis rails to the chassis
Procedure
1.
Align the mounting brackets with the screw holes in the rear mounting position or front mounting position, as shown in the
following figures:
Installing the switch 17