HPE 5920 series

Chassis views and technical specifications
Chassis views
HPE 5920AF-24XG/HPE 5920AF-24XG TAA
Figure 34: Front panel
(1) SFP+ port
(2) SFP+ port LED
(3) Management Ethernet port (4) Console port
(5) System status LED (SYS) (6) ACT LED for the management Ethernet port
(7) LINK LED for the management Ethernet port
Figure 35: Rear panel
(1) Power supply slot 1
(2) Power supply slot 2
(3) Fan tray slot 1 (4) Fan tray slot 2
The HPE 5920AF-24XG and 5920AF-24XG TAA switches come with the power supply slots empty and the filler modules for
the slots as accessories. You can install one or two power supplies for the switch as needed. In this figure, two 650W AC power
supplies are installed. For more information about installing and removing the power supply, see Installing/removing a power
supply on page 27.
The HPE 5920AF-24XG and 5920AF-24XG TAA switches also come with the fan tray slots empty. You must install two fan
trays for the HPE 5920AF-24XG and 5920AF-24XG TAA for adequate heat dissipation, and their models must be the same. In
this figure, two LSVM1FANSC fan trays are installed. For more information about installing and removing the fan tray, see
Installing/removing a fan tray on page 25.
50 Chassis views and technical specifications