HPE 5920 series

The LSWM1FANSC/LSWM1FANSCB/LSWM1HFANSC/LSWM1HFANSCB fan tray (HPE 5900AF-48XG-4QSFP+):
Figure 16: Installing a fan tray in the HPE 5900AF-48XG-4QSFP+
The LSVM1FANSC/LSVM1FANSCB fan tray (HPE 5920AF-24XG):
Figure 17: Installing a fan tray in the HPE 5920AF-24XG
4.
Fasten the captive screw on the fan tray with a Phillips screwdriver until the fan tray is securely attached in the chassis. See
callout 2 in
Figure 16: Installing a fan tray in the HPE 5900AF-48XG-4QSFP+ on page 26 or Figure 17: Installing a fan
tray in the HPE 5920AF-24XG on page 26.
If the captive screw cannot be tightly fastened, verify the installation of the fan tray.
Removing a fan tray
WARNING:
• Do not take out the fan tray until the fans completely stop rotating.
• Never touch the fans and rotation axis.
26 Installing the switch