HPE 5920 series

FRUs and compatibility matrixes
This appendix describes the field replaceable units (FRUs) available for the HPE 5920 and 5900 Switch Series and their
compatibility.
All the FRUs in this appendix are hot swappable.
Power supplies
Power
supply
Specifications Switch model Reference
650 W AC
power
supply
• Rated input voltage: 100
VAC to 240 VAC @ 50
Hz or 60 Hz
• Max input voltage: 90
VAC to 264 VAC @ 47
Hz to 63 Hz
• Max output power: 650
W
• HPE 5920AF-24XG
• HPE 5920AF-24XG TAA
• HPE 5900AF-48XG-4QSFP+
• HPE 5900AF-48XG-4QSFP+ TAA
• HPE 5900CP-48XG-4QSFP+
• HPE 5900CP-48XG-4QSFP+ TAA
• HPE 5900CP-48XG-4QSFP+8Gb FC B-F
• HPE 5900AF-48XGT-4QSFP+
• HPE 5900AF-48XGT-4QSFP+ TAA
• HPE 5900AF-48G-4XG-2QSFP+
• HPE 5900AF-48G-4XG-2QSFP+ TAA
HPE A58x0AF 650W AC
(JC680A) & 650W DC
(JC681A) Power Supplies
User Guide or HPE FlexFabric
Switch 650W 48V Hot Plug
NEBS Compliant DC Power
Supply (JH336A) User Guide
640 W DC
power
supply
•
• Rated input voltage: –40
VDC to –60 VDC
• Max input voltage: –40
VDC to –72 VDC
• Max output power: 650
W
IMPORTANT:
• Do not install AC and DC power supplies on the same switch.
• When a switch has two power supplies for redundancy, you can replace a power supply without powering o the
switch. Make sure the power supply to be replaced is powered o before you replace it.
Fan trays
Item
Specifications
LSWM1FANSC (for the HPE 5900AF-48XG-4QSFP+, 5900AF-48XG-4QSFP+ TAA, 5900CP-48XG-4QSFP+,
5900CP-48XG-4QSFP+ TAA, 5900CP-48XG-4QSFP+8Gb FC B-F, 5900AF-48G-4XG-2QSFP+, and
5900AF-48G-4XG-2QSFP+ TAA switches)
Fans Two 40 × 40 × 28 mm (157 × 157 × 11 in) fans
Fan speed 18500 RPM
Max airflow 45 CFM
Table Continued
58 FRUs and compatibility matrixes