Need help?Do you have a question about the HPE 5510 HI Series and is the answer not in the manual?
General| Input Voltage | 100-240 VAC |
|---|---|
| Operating Temperature | 0°C to 45°C |
| Uplinks | 4x 10G SFP+ |
| Layer Support | Layer 3 |
| Stacking | Up to 9 switches |
| Routing Protocol | OSPF, BGP, RIP |
| VLANs | 4094 |
| Operating Humidity | 10% to 90% (non-condensing) |
| Switching Capacity | Up to 336 Gbps |
| Ports | 24 or 48 x 10/100/1000 ports, plus optional 10GbE uplinks |
| PoE Support | IEEE 802.3af PoE and IEEE 802.3at PoE+ (on PoE models) |
| Dimensions | 440 x 430 x 44 mm |
Step-by-step guide for mounting the switch in a 19-inch rack using different bracket types.
Procedures for installing and removing power supply units for switch operation.
Steps for installing, removing, and verifying interface cards in the switch.
Guides on connecting to the switch via console or USB for initial setup.
Covers planning IRF fabric size, site, topology, connections, and cabling schemes.
Instructions for configuring basic IRF settings and verifying the fabric setup.
To Next Page