HPE 5510 HI Series

60
Product
code
HPE description
Central
wavelength
(nm)
Connector
Fiber diameter (µm)
Max
transmission
distance
Transceiver
NOTE:
 To guarantee the functionality of the SFP ports, use only HPE SFP transceiver modules.
 The SFP transceiver modules available for the switch are subject to change over time. For the most
up-to-date list of SFP transceiver modules, consult your HPE sales representative or technical support
engineer.
 For the SFP transceiver module specifications, see HP Comware-Based Devices Transceiver Modules
User Guide .
SFP+ port
The switch provides four fixed SFP+ ports on the front panel. To connect the peer SFP+ ports over a long
distance, use SFP/SFP+ transceiver modules and fibers. To connect the peer SFP+ ports over a short
distance, use SFP+ cables. You can install the 1000 Mbps SFP transceiver module in Table 18 and 10
Gbps SFP+ transceiver modules in Table 19 in the SFP+ ports.
Table 18 1000 Mbps SFP transceiver modules available for the SFP+ ports
Product
code
HPE
description
Central
wavelength
(nm)
Connector
Cable/fiber
diameter (µm)
Modal
bandwidth
(MHz × km)
Max
transmission
distance
JD118B
HP X120 1G
SFP LC SX
Transceiver
850
LC
Multi-mode,
50/125
500
550 m
(1804.46 ft)
400
500 m
(1640.42 ft)
Multi-mode,
62.5/125
200
275 m
(902.23 ft)
160
220 m
(721.78 ft)
JD119B
HP X120 1G
SFP LC LX
Transceiver
1310
LC
Single-mode,
9/125
N/A
10 km (6.21
miles)
Multi-mode,
50/125
500 or 400
550 m
(1804.46 ft)
Multi-mode,
62.5/125
500
550 m
(1804.46 ft)
JD061A
HP X125 1G
SFP LC LH40
1310nm
XCVR
1310
LC
Single-mode,
9/125
N/A
40 km (24.86
miles)
JD062A
HP X120 1G
SFP LC LH40
1550nm
XCVR
1550
LC
Single-mode,
9/125
N/A
40 km (24.86
miles)