44
3. Grasp the two handles of the fan tray with the side marked TOP facing up, and slide the fan tray
along the guide rails into the slot until the fan tray seats in the slot and has a firm contact with the
backplane.
Figure 44 Installing a fan tray
Configuration terminal problems
If the configuration environment setup is correct, the configuration terminal displays booting information
when the switch is powered on. If the setup is incorrect, the configuration terminal displays nothing or
garbled text.
No terminal display
Symptom
The configuration terminal displays nothing when the switch is powered on.
Solution
To resolve the problem:
1. Verify that the power supply is supplying power to the switch.
2. Verify that the console cable is correctly connected.
3. Verify that the console cable does not have any problems and the terminal settings are correct.
4. If the problem persists, contact HPE Support.
Garbled terminal display
Symptom
Terminal display is garbled.
To Next Page
Loading...
