HPE 5510 HI Series

56
Power supply
Specifications
Reference
90 VAC to 264 VAC @ 47 Hz to 63 Hz
 Max output power:
150 W
PSR150-D1
 Rated input voltage range:
–48 VDC to –60 VDC
 Max input voltage range:
–36 VDC to –72 VDC
 Max output power:
150 W
HPE PSR150-A & PSR150-D Power
Supplies User Guide
PSR720-56A
 Rated input voltage range:
100 VAC to 240 VAC @ 50 Hz or 60 Hz
 Max input voltage range:
90 VAC to 264 VAC @ 47 Hz to 63 Hz
 Max output power:
720 W
HPE PSR720-56A Power Supply
User Guide
PSR1110-56A
 Rated input voltage range:
115 VAC to 240 VAC @ 50 Hz or 60 Hz
 Max input voltage range:
102.5 VAC to 264 VAC @ 47 Hz to 63
Hz
 Max output power:
1110 W
HPE PSR1110-56A Power Supply
User Guide
NOTE:
The PSR1110-56A power supply adds 64 mm (2.52 in) to the depth of the switch, including the depth of
the power supply handle.
Hot swappable interface cards
The switch provides an interface card slot at the rear. The following table describes the interface cards
available for the switch.
Card model
Port type and quantity
Available transceiver modules and
cables
LSWM2QP2P
2 × 40 Gbps QSFP+ fiber ports
See Table 21,Table 22, and Table 23.
LSWM2SP2PM
2 × 1/10 Gbps SFP+ fiber ports
See Table 18, Table 19, and Table 20.
LSWM2XGT2PM
2 × 1/10GBase-T Ethernet ports
N/A
NOTE:
The ports on the LSWM2SP2PM and LSWM2XGT2PM interface cards can only operate in 10 Gbps.
For more information about these interface cards, see user manuals for the interface cards.