HPE 5510 HI Series

67
Port mode LED
(Mode) status
SFP pPort LED
status
Description
Steady yellow
A link is present on the port and tThe port is operating at 100
Mbps. The port LED fast flashes when the port is sending or
receiving data.
Flashing yellow
The port is sending or receiving data at 100 Mbps.
Flashing yellow (3
Hz)
POST has failed on the port.
Off
No link is present on the port.
The port mode LED operates in IRF mode.
Flashing yellow (IRF
mode)
Off
The port status LEDs on the switch work in conjunction to indicate
the IRF member ID of the switch. For example, if the LEDs for ports
1 to 5 are steady green and the other port LEDs are off, the IRF
member ID of the switch is 5.
SFP+ port LED
Table 29 SFP+ port LED description
SFP+ port LED status
Description
Steady green
A link is present on the port and the port is operating at 10 Gbps.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
A link is present on the port and the port is operating at 1 Gbps.
Flashing yellow
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz)
POST has failed on the port.
Off
 No link is present on the port.
 The port mode LED operates in IRF mode.
 The port mode LED operates in PoE mode (for PoE switches only.)
Management Ethernet port LEDs
The switch provides an ACT/LINK LED to indicate the operating state of the management Ethernet port.
Table 30 Management Ethernet port LED description
Management Ethernet port
LED (ACT/LINK) status
Description
Green
The port is up.
Yellow
The port is sending or receiving data.
Flashing yellow (3 Hz)
The port has failed POST.
Off
No link is present on the port.