55
Appendix B FRUs and compatibility matrixes
FRUs and compatibility matrixes
HPE 5510 48G 4SFP+ HI
HPE 5510 24G SFP 4SFP+ HI
HPE 5510 24G PoE+ 4SFP+ HI
HPE 5510 48G PoE+ 4SFP+ HI
Hot swappable power supplies
The PSR720-56A, PSR1110-56A, PSR150-A1, and PSR150-D1 power supplies support asset management.
You can use the display device manuinfo command to view the name, sequence number, and vendor of
the power supplies you have installed on the device.
You can install one power supply, or two power supplies for redundancy on the HPE 5510 24G 4SFP+
HI, HPE 5510 24G SFP 4SFP+ HI, and HPE 5510 48G 4SFP+ HI switches. These switches support mix of
an AC power supply and a DC power supply.
You can install one power supply, or two power supplies for redundancy on the HPE 5510 24G PoE+
4SFP+ HI and HPE 5510 48G PoE+ 4SFP+ HI switches. The PoE capabilities of these switches vary by
power supply configuration. For more information, see Table 12.
All HPE 5510 HI switch models switches support hot swapping of fan trays. You must install two fan trays
of the same model for the switch. Do not power on the switch when it does not have any fan trays or has
only one fan tray installed.
Hot swappable power supplies
All HPE 5510 HI switch models switches support hot swapping of power supplies. The following table
describes power supplies available for the switch.
Rated input voltage range:
100 VAC to 240 VAC @ 50 Hz or 60 Hz
Max input voltage range:
HPE PSR150-A & PSR150-D Power
Supplies User Guide
To Next Page
Loading...
