HPE 5510 HI Series

51
Technical specifications
Table 11 Technical specifications for non-PoE switch models
Item
HPE 5510 24G SFP 4SFP+ HI
HPE 5510 24G 4SFP+
HI
HPE 5510 48G 4SFP+ HI
Dimension
s (H × W
× D)
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17 in)
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17
in)
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17 in)
Weight
≤ 7.5 kg (16.53 lb)
≤ 7.5 kg (16.53 lb)
≤ 7.5 kg (16.53 lb)
Console
ports
 1 × USB mini console port
 1 × serial console port
Only the USB mini console port is available when you connect both ports.
USB ports
1
1
1
Managem
ent
Ethernet
ports
1
1
1
SFP+ ports
4
4
4
SFP ports
24 (The rightmost eight SFP ports
and their corresponding
10/100/1000Base-T
autosensing Ethernet ports form
combo interfaces.)
N/A
N/A
10/100/
1000Bas
e-T
autosensi
ng
Ethernet
ports
8 (Each and its corresponding
SFP port form a combo
interface.)
24
48
Expansion
interface
card slots
1, on the rear panel
1, on the rear panel
1, on the rear panel
Power
supply
slots
2, on the rear panel
2, on the rear panel
2, on the rear panel
Fan tray
slots
2, on the rear panel
2, on the rear panel
2, on the rear panel
Input
voltage
 AC-input
 Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
 Max voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz
 DC-input
 Rated voltage range: –48 VDC to –60 VDC
 Max voltage range: –36 VDC to –72 VDC
NOTE: