HPE 5510 HI Series

62
Figure 55 SFP+ DAC cable
(1) Connector
(2) Pull latch
NOTE:
 To guarantee the functionality of the SFP+ ports, use only HPE SFP/SFP+ transceiver modules and SFP+
DAC cables.
 The SFP/SFP+ transceiver modules and SFP+ DAC cables available for the switch are subject to change
over time. For the most up-to-date list of SFP/SFP+ transceiver modules and SFP+ DAC cables, consult
your HPE sales representative or technical support engineer.
 For the specifications for the HPE SFP/SFP+ transceiver modules and SFP+ DAC cables, see HP
Comware-Based Devices Transceiver Modules User Guide .
QSFP+ port
The LSWM2QP2P interface card provide QSFP+ ports. You can install the QSFP+ transceiver modules in
Table 21 and the QSFP+ DAC cables in Table 22 in the QSFP+ ports.
Table 21 QSFP+ transceiver modules available for the QSFP+ ports
Product
code
HPE
description
Central
wavelength
(nm)
Connector
Cable/fiber
diameter (µm)
Modal
bandwidth
(MHz × km)
Max
transmission
distance
JG661
A
HP X140 40G
QSFP+ LC LR4
SM XCVR
Four lanes:
 1271
 1291
 1311
 13 31
LC
9/125
N/A
10km (6.21
miles)
JG709
A
HP X140 40G
QSFP+ CSR4
300m XCVR
850
LC
50/125
2000
300 m
(984.25 ft)
4700
400 m
(1312.33 ft)
4700
150 m
(492.12 ft)
1
2