HPE 5510 HI Series User Manual

i
Legal and notice information
© Copyright 2015 Hewlett-Packard Development Company, L.P.
No part of this documentation may be reproduced or transmitted in any form or by any means without
prior written consent of Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing, performance, or use
of this material.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

HPE 5510 HI Series Specifications

General

Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Uplinks	4x 10G SFP+
Layer Support	Layer 3
Stacking	Up to 9 switches
Routing Protocol	OSPF, BGP, RIP
VLANs	4094
Operating Humidity	10% to 90% (non-condensing)
Switching Capacity	Up to 336 Gbps
Ports	24 or 48 x 10/100/1000 ports, plus optional 10GbE uplinks
PoE Support	IEEE 802.3af PoE and IEEE 802.3at PoE+ (on PoE models)
Dimensions	440 x 430 x 44 mm