HPE FlexNetwork 5130 Series User Manual

11
Command Description
display packet-filter
Displays whether an ACL has been successfully applied to
an interface for packet filtering.
display qos-acl resource
Displays QoS and ACL resource usage.
display qos policy control-plane
Displays information about the QoS policies applied to the
specified control plane.
display qos policy global
Displays information about global QoS policies.
display qos policy interface
Displays information about the QoS policies applied to an
interface or to all interfaces.
display qos vlan-policy
Displays information about QoS policies applied to VLANs.
display traffic classifier user-defined
Displays traffic class configuration.
display traffic behavior user-defined
Displays traffic behavior configuration.

HPE FlexNetwork 5130 Series Specifications

General

Category	Network Switch
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 x SFP+ ports
Routing Protocol	Static routing, RIP, OSPF, BGP
PoE	Available on some models (PoE+)
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Management	Web, CLI, SNMP
Jumbo Frame Support	Yes
VLANs	4094
Operating Humidity	5% to 95% (noncondensing)