HPE FlexNetwork 5130 Series User Manual

21
Related commands
This section lists the commands that you might use for troubleshooting ports.
Command Remarks
display diagnostic-information
Displays or saves running status data for
multiple feature modules.
display interface brief
Displays brief interface information.
display transceiver alarm interface
Displays alarms present on transceiver
modules.
display transceiver interface
Displays key parameters of the transceiver
module installed in an interface.

HPE FlexNetwork 5130 Series Specifications

General

Category	Network Switch
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 x SFP+ ports
Routing Protocol	Static routing, RIP, OSPF, BGP
PoE	Available on some models (PoE+)
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Management	Web, CLI, SNMP
Jumbo Frame Support	Yes
VLANs	4094
Operating Humidity	5% to 95% (noncondensing)