ItemItem DescriptionDescription
1 Optical drive (optional)
2 Serial number / iLO information pull tab
3 DisplayPort 1.1a (optional)
4 USB 2.0 port (optional)
5 USB 3.2 Gen1 port
6 iLO service port
7 4 LFF drives (optional)
The serial number / iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag
label. The other side shows the default iLO account information.
This port is included in the front USB and DisplayPort assembly option.
The 4 LFF drive bays support SAS or SATA drives .
8 + 2 SFF drive configuration8 + 2 SFF drive configuration
ItemItem DescriptionDescription
1 Serial number / iLO information pull tab
2 Optical drive cage assembly (optional)
3 2 SFF side-by-side drive cage assembly (optional)
4 iLO service port
5 USB 3.2 Gen1 port
6 8 SFF drives (optional)
The serial number / iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag
label. The other side shows the default iLO account information.
This assembly includes:
One DisplayPort 1.1a
One USB 2.0 port
One optical drive bay
Depending on the type of drive backplane installed , the server supports SFF SAS, SATA, or U.3 NVMe drives .
20 20 E3.S E3.S drive configurationdrive configuration
1
2
2
3
1
2
3
1
2
3
3
1
2
3
To Next Page
Loading...
