11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server .
CoolingCooling
SubtopicsSubtopics
Installing a high-performance fanInstalling a high-performance fan
Installing a high-performance fanInstalling a high-performance fan
About this taskAbout this task
Certain hardware configurations require high-performance fans. To verify a specific configration, see the product QuickSpecs on the
Hewlett Packard Enterprise websitewebsite.
This kit meets extended ambient operating temperatures above 35 degrees Celsius. For more information about extended ambient
configurations, see the Hewlett Packard EnterpriseHewlett Packard Enterprise website website .
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove any fan blanks.
6. Remove all standard fans.
To Next Page
Loading...
