HPE ProLiant DL360 Gen11

b. Install the boot device in the server.
11. Connect the power and signal cables to the HPE NS204i Boot Device .
12. Install the access panel .
13. Install the server in the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server.
17. Verify the Online/Activity LEDs on the HPE NS204i Boot Device are solid green .
ResultsResults
The installation is complete.
Power supply optionsPower supply options
HPE ProLiant DL360 Gen11 Server User Guide 73