4 LFF
Item Description Status
1 UID button/LED
1
Solid blue = Activated.
Flashing blue:
• 1 Hz = Remote management or firmware upgrade in
progress.
• 4 Hz = iLO manual reboot sequence initiated.
• 8 Hz = iLO manual reboot sequence in progress.
O = Deactivated.
2 NIC status LED
1
Solid green = Link to network.
Flashing green = Network active.
O = No network activity.
3 Health LED
1
Solid green = Normal.
Flashing green = iLO is rebooting.
Flashing amber = System degraded.
Flashing red = System critical.
2
4 Power On/Standby button and
system power LED
1
Solid green = System on.
Flashing green = Performing power on sequence.
Solid amber = System in standby.
O = No power present.
3
1
When all four LEDs described in this table flash simultaneously, a power fault has occurred.
10 Component identification
To Next Page
Loading...
