ItemItem ComponentComponent DescriptionDescription
1 Padlock eye To lock the chassis cover and prevent access to the internal components, attach a
padlock here.
2 iLO dedicated network port To connect iLO to a dedicated management network, connect a standard Ethernet
cable here. This port requires the installation of the iLO enablement option.
3 Kensington security slot To secure the server to a heavy or immovable object, connect an antitheft security
cable here.
4 USB 3.2 Gen 1 Type-A ports Connect USB devices. These ports are backwards compatible with earlier USB
Type-A version devices.
5 USB 2.0 port
6 DisplayPort 1.1a Connects to a high-resolution digital display device.
7 VGA port Connects to an analog display device.
8 1 Gb RJ45 port 4 To connect the server to a wired network, connect a standard Ethernet cable here.
9 1 Gb RJ45 port 3
10 1 Gb RJ45 port 2
11 1 Gb RJ45 port 1/iLO shared network port To connect the server to a wired network, connect a standard Ethernet cable here.
When the iLO enablement option is installed, this port can be configured to handle
both server network and iLO network traffic.
12 Power jack Connects the power cord.
13 PCIe4 x16 expansion slot Connects a half-height, half-length (low-profile) PCIe4 expansion card option.
These ports are also known as SuperSpeed USB 5 Gb/s ports. The appropriate cable and compatible hardware are required to take
advantage of the 5 Gb/s data transfer speed.
SubtopicsSubtopics
Display device setupDisplay device setup
Display device setupDisplay device setup
1
1
To Next Page
Loading...
