10. Secure the power cord, wires, and cables in the strain relief strap attached to the power supply handle:
a. Unwrap the strain relief strap from the power supply handle.
CAUTION:
Avoid tight bend radii to prevent damaging the internal wires of a power cord or a server cable.
Never bend power cords and server cables tight enough to cause a crease in the sheathing.
b. Secure the power cord, wires, and cables with the strain relief strap. Roll the extra length of the strap
around the power supply handle.
11. Slide the power supply into the bay until it clicks into place.
78 Hardware options installation
To Next Page
Loading...
