HPE ProLiant ML350 Gen10 User Manual

Install the fan cage
Procedure
1. Observe the guidelines for managing cables.
2. Make sure that all the system cables that are routed through the front cable channel are properly secured
in the metal cable tabs. This is done to prevent system damage due to cables being inadvertently caught
under the fan cage.
3. Install the fan cage:
a. Align the fan cage with its chassis brackets.
b. Close the latches until they click into place.
Install the fan cage 55

HPE ProLiant ML350 Gen10 Specifications

General

Processor	Intel Xeon Scalable processors
Expansion Slots	Up to 8 PCIe 3.0 slots
Processor Details	Up to 28 cores per processor, supports up to 2 processors
Memory	Up to 3TB DDR4
Storage	Supports SAS, SATA, and NVMe drives
RAID Support	HPE Smart Array
Network	4 x 1GbE ports (embedded)
Power Supply	800W or 1600W Platinum, Hot-Plug, Redundant Power Supply
Form Factor	Tower
Remote Management	HPE iLO 5
Operating System Support	Windows Server, VMware, and various Linux distributions