EasyManua.ls Logo

HPE ProLiant ML350 Gen10 - Power Supply Specifications; HPE 500 W Low Halogen Non-Hot-Plug Power Supply

HPE ProLiant ML350 Gen10
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specification Value
Height 17.4 cm ( 6.85 in)
Depth 64.8 cm (25.51 in)
Width 44.5 cm (17.52 in)
Weight, minimum 21 kg (46.30 lb)
Weight, maximum 41 kg (90.39 lb)
Power supply specifications
Depending on the installed options and the regional location where the server was purchased, the server can
be configured with one of the following power supplies:
HPE 500W Low Halogen Non-hot-plug Power Supply on page 174
This power supply is only supported when the server is in tower mode.
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply on page 175
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply on page 176
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply on page 176
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply on page 177
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply on page 178
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply on page 179
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website.
HPE 500W Low Halogen Non-hot-plug Power Supply
Specification Value
Input requirements
Rated input voltage
100 VAC to 240 VAC
240 VDC for China only
Rated input frequency 50 Hz to 60 Hz
Rated input current
6.5 A at 100 VAC
3.2 A at 200 VAC
2.7 A at 240 VDC for China only
Maximum rated input power
646 W at 100 VAC
624 W at 200 VAC
BTUs per hour
2,204 at 100 VAC
2,129 at 200 VAC
Power supply output
Table Continued
174 Power supply specifications

Table of Contents

Other manuals for HPE ProLiant ML350 Gen10

Related product manuals