32 User Manual
Figure 28: Sliding the Blades in the Rails
Step 5. Secure the system in the rack by tightening the 8 screws inserted in Step 3 and Step 4 with a
torque of 4.5±0.5 Nm.
2.5.4 Side by Side Mounting for SN2100M Rail Kit
The following parts are included in the rail kit (see Figure 29):
• 1 metal frame for two systems (A)
A designated rail kit for the SN2100M systems can be purchased separately.
This section is relevant to short-depth systems that allow such form of installation
only.
At least two people are required to safely mount the system in the rack.
Table 9 - Installation Kit
Kit OPN Rack Size and Rack Depth Range
Q2F25A Rack installation kit for SN2100M series short depth 1U switches, allows
installation of one or two switches side-by-side into standard depth racks
To Next Page
Loading...
