HPE Synergy 12000 Frame Setup And Installation Guide

HPE Synergy 12000 Frame Setup and
Installation Guide
Part Number: 806424-005
Published: September 2019
Edition: 5
Abstract
This document describes identification, installation, and setup for the HPE Synergy System. This guide is for
an experienced service technician. Hewlett Packard Enterprise assumes you are qualified in the servicing of
the HPE Synergy components and overall solution.

HPE Synergy 12000 Frame Specifications

General

Maximum Compute Modules	12
Product Type	Blade System Chassis
Rack Units	10U
Management Module	HPE Synergy Composer
Power Supplies	6
Operating Temperature	10° to 35°C (50° to 95°F)
Relative Humidity	8 to 90% (non-condensing)