What to do if hpmont HD5L-4T011 displays E0012 error?
If the hpmont Controller displays error E0012, indicating a motor auto-tuning fault, check the motor connection and input correct nameplate parameters.
What to do if hpmont HD5L-4T011 displays E0013 error?
If the hpmont Controller displays error E0013, which indicates soft start contactor failed, replace the contactor.
General| Brand | hpmont |
|---|---|
| Model | HD5L-4T011 |
| Category | Controller |
| Language | English |
Provides guidelines for installing the controller to meet electromagnetic compatibility standards.
Introduces parameters for motor type, control mode, speed, frequency, and traction machine settings.
Covers fundamental parameters like motor type, control mode, rated speed, and operating mode.
Covers essential parameters for asynchronous motors, including rated power, voltage, current, and auto-tuning.
Covers parameters specific to synchronous motors, including type, voltage, current, and auto-tuning.
Details parameters for motor overheat, input/output phase loss, and motor overload protection.
Provides a step-by-step guide for system analysis, wiring, and parameter setup for elevator applications.
Explains the procedures for auto-tuning motors (asynchronous and synchronous) for optimal performance.
Explains how to apply the controller in terminal MS (multi-speed) run mode for elevator control.
Explains how to apply the controller in terminal analogue run mode for elevator control.
Describes the application of battery-driven run mode for emergency elevator operation during power outages.
Lists common fault codes, possible causes, and corresponding counter-measures for troubleshooting.
Covers fundamental parameters like motor type, control mode, rated speed, and operating mode.
Covers essential parameters for asynchronous motors, including rated power, voltage, current, and auto-tuning.
Details parameters for motor overheat, input/output phase loss, and motor overload protection.
To Next Page
